jhande
Sep 29, 03:35 AM
FWIW Tom Yager at InfoWorld had an interesting point (http://www.infoworld.com/article/06/09/27/40OPcurve_1.html) re the looming Core Wars (aside: I loved to play that :) and its still going on) that I fully agree with.
"If I had a vote, I�d have both vendors stop at four cores and focus on fat and fast busses that give those cores something to fill instead of something to wait for. AMD and Intel both face bus bottlenecks, and that�s the bane of multi-core. " - Tom
"If I had a vote, I�d have both vendors stop at four cores and focus on fat and fast busses that give those cores something to fill instead of something to wait for. AMD and Intel both face bus bottlenecks, and that�s the bane of multi-core. " - Tom
Amazing Iceman
May 2, 09:27 AM
How stupid does a user needs to be in order to install, run and then enter credit card information into an application that pops up by itself?
:eek:
:eek:
ChrisA
Sep 26, 12:08 PM
What incentive does anyone ever have to buy if they keep announcing new chips?
What incentive? Money. If you need to get some work out to a client you need to have some kind of computer. For example we bought a new Dual Xeon system with 4GB RAM and a set of SCSI disks because the old box was "way slow" now I can do many more Build/Test/Debug cycles every day. Yes there are now even faster boxes but I've gotten much more work done that had we waited would not have gotten done. The $4500 computer paid for it self rather quickly
On the other hand if a computer is to be used as a game console and media player you can never justify the price. It's just a toy and you buy it with "disposable" income with no hope of a return on the investment
But most of these Mac Pros are sold to people who at least hope to make more money with the machine than they spent for it. So for most users waiting is simply to expensive.
Also solid state drives are needed to properly service the I/O needs. Why NOT put a solid state SATA drive in one slot on a MacPro so you can use it for a swap space?
How many "page outs" per second does your system do? If you have enough RAM not many. Even those few writes DO go into RAM. There is likey a large RAM cache built into the disk drive. As for "page ins" they mostly come from your Applcations Folder, not the swap space. Mac OSX is smart enough to know that it does not need to write RAM pages to swap space if the RAM page contains only executable code. If you want to make the system go faster you would put your applactions in the solid state SATA so as to speed up page ins. But if space is limited a better way would be to put only the applactions you are currently using in the solid state SATA but to go even faster why not skip the bottleneck of the SATA interface and put the RAM that would have gone into the solid state SATA on your system bus. This is what modern computers do. They maintain a RAM cache of the disk(s). With the data (cache of the disk) in system RAM it need not even move. The OS simply does some "magic" with mapping registers and the data appera to move without need of any physical copy. A write to a register is more than 1000 times faster then moving data off a sold state SAYA drive.
The ONLY cases where a solid state SATA disk could improve performance is (1) if you have already maxed out the computer's system RAM and need to add even more. So either your Mac Pro is at 16MB or you imac is at 3GB and you need more. or (2) You have a huge abount of dta to process and you put the data in the solid state drive. This means the drive will be hugely expensive. Cheaper to use something like a SAN storage.
What incentive? Money. If you need to get some work out to a client you need to have some kind of computer. For example we bought a new Dual Xeon system with 4GB RAM and a set of SCSI disks because the old box was "way slow" now I can do many more Build/Test/Debug cycles every day. Yes there are now even faster boxes but I've gotten much more work done that had we waited would not have gotten done. The $4500 computer paid for it self rather quickly
On the other hand if a computer is to be used as a game console and media player you can never justify the price. It's just a toy and you buy it with "disposable" income with no hope of a return on the investment
But most of these Mac Pros are sold to people who at least hope to make more money with the machine than they spent for it. So for most users waiting is simply to expensive.
Also solid state drives are needed to properly service the I/O needs. Why NOT put a solid state SATA drive in one slot on a MacPro so you can use it for a swap space?
How many "page outs" per second does your system do? If you have enough RAM not many. Even those few writes DO go into RAM. There is likey a large RAM cache built into the disk drive. As for "page ins" they mostly come from your Applcations Folder, not the swap space. Mac OSX is smart enough to know that it does not need to write RAM pages to swap space if the RAM page contains only executable code. If you want to make the system go faster you would put your applactions in the solid state SATA so as to speed up page ins. But if space is limited a better way would be to put only the applactions you are currently using in the solid state SATA but to go even faster why not skip the bottleneck of the SATA interface and put the RAM that would have gone into the solid state SATA on your system bus. This is what modern computers do. They maintain a RAM cache of the disk(s). With the data (cache of the disk) in system RAM it need not even move. The OS simply does some "magic" with mapping registers and the data appera to move without need of any physical copy. A write to a register is more than 1000 times faster then moving data off a sold state SAYA drive.
The ONLY cases where a solid state SATA disk could improve performance is (1) if you have already maxed out the computer's system RAM and need to add even more. So either your Mac Pro is at 16MB or you imac is at 3GB and you need more. or (2) You have a huge abount of dta to process and you put the data in the solid state drive. This means the drive will be hugely expensive. Cheaper to use something like a SAN storage.
KnightWRX
May 2, 03:24 PM
It decompressed the zip file and executes code to launch an installer. This is considered a safe action because the user still has to continue to run the installer.
Installation of MacDefender via the installer requires password authentication by the user.
So Safari auto-downloads, unarchives and auto-executes something, but you think it is safe because it's an installer ? :confused:
I'm sorry, but I'm still curious about the "auto-execute" part. Why would it run the installer automatically after decompressing it. That sounds quite "unsafe" to me. Even without administrator privilege, that means code can still run that can affect the current user's account.
like there's no such thing as a virus for Mac...
Link to Mac OS X virus please. Anything, a name, a description of what it does, something.
Viruses and malware are not the same thing.
I'll just leave this right here...http://www.clamxav.com/
What's your point with ClamAV ? It's the defacto Unix anti-virus scanner that's used to scan for Windows viruses in e-mail servers usually.
Installation of MacDefender via the installer requires password authentication by the user.
So Safari auto-downloads, unarchives and auto-executes something, but you think it is safe because it's an installer ? :confused:
I'm sorry, but I'm still curious about the "auto-execute" part. Why would it run the installer automatically after decompressing it. That sounds quite "unsafe" to me. Even without administrator privilege, that means code can still run that can affect the current user's account.
like there's no such thing as a virus for Mac...
Link to Mac OS X virus please. Anything, a name, a description of what it does, something.
Viruses and malware are not the same thing.
I'll just leave this right here...http://www.clamxav.com/
What's your point with ClamAV ? It's the defacto Unix anti-virus scanner that's used to scan for Windows viruses in e-mail servers usually.
gugy
Aug 29, 02:50 PM
It isnt absolutley 100% false. There is an extreme amount of people on this planet. Look at that rathole of a place China. And in america, the immigrants. There are a hell of a lot of people and my solution: Nuke the middle-east.
and he said 40 years ago not 30 go back to 66 from NOW
What an intelligent statement.:rolleyes:
and he said 40 years ago not 30 go back to 66 from NOW
What an intelligent statement.:rolleyes:
aswitcher
Jul 13, 07:36 AM
I can see the iMac getting a makeover. The switch to intel was a rush job in my mind, and I think they are working on a modified shell to better cope with components and heat for a faster intel line for the next few years.
AppliedVisual
Oct 31, 11:59 PM
Sorry for the noob question, but does anyone know how well Maya 7 will scale with 8 cores? My buddy is debating whether to buy a single Kentsfield or step up to dual Clovertons. He has a freelance business in which he uses Maya 7 quite a bit. Thanks.
Well the Maya application itself won't benefit anymore from 8 cores than it would from 2 or 4. But 8-cores will help immensely with rendering, especially if he uses MentalRay and has enough licenses. Currently Maya Complete has 2 licenses and Maya Unlimited has 8. I'm not sure how the Maya licenses will apply to quad-core CPUs just yet.
Well the Maya application itself won't benefit anymore from 8 cores than it would from 2 or 4. But 8-cores will help immensely with rendering, especially if he uses MentalRay and has enough licenses. Currently Maya Complete has 2 licenses and Maya Unlimited has 8. I'm not sure how the Maya licenses will apply to quad-core CPUs just yet.
aswitcher
Jul 12, 03:46 PM
Smallish mid-tower case
Intel Core 2 Duo @ 2.8Ghz or better
1GB RAM
250GB SATA 3.0 HD
1-PCIe x16 Slot
1-Standard PCI Slot
6-USB 2.0 ports (One in front)
1- Firewire 800 port (in front)
Dual Layer DVD
Onboard 10/100/1000 (I don't care if its wireless, but a wireless opition would be nice but not necessary)
Graphics Card should be x1600XT or better with 256mb RAM
I want it at or less than $1199.00
4 ram slots so I can get 2 gig cheap or 4 gig if I want it.
2 x FW 400s well.
BT/AX standard of course.
Frontrow IR port.
Optical audio in/out.
User replacable Ram, HDD, Graphics card(?).
Intel Core 2 Duo @ 2.8Ghz or better
1GB RAM
250GB SATA 3.0 HD
1-PCIe x16 Slot
1-Standard PCI Slot
6-USB 2.0 ports (One in front)
1- Firewire 800 port (in front)
Dual Layer DVD
Onboard 10/100/1000 (I don't care if its wireless, but a wireless opition would be nice but not necessary)
Graphics Card should be x1600XT or better with 256mb RAM
I want it at or less than $1199.00
4 ram slots so I can get 2 gig cheap or 4 gig if I want it.
2 x FW 400s well.
BT/AX standard of course.
Frontrow IR port.
Optical audio in/out.
User replacable Ram, HDD, Graphics card(?).
Lord Blackadder
Mar 14, 04:29 PM
The fact remains that most of America's energy problems are caused by conspicuous consumption.
It's a global problem, though the US is the worst offender. Dealing with the energy crisis must be accomplished by attaking the problem from both ends - renewable sources at one end and lower per capita energy consumption at the other.
The solution does indeed need to be multi-tiered and intelligently applied. I've heard that the Japanese Nuclear plants were built to survive a strong earthquake or a tsunami, but not both. Well what often occurs when you get a strong earthquake offshore? That's right, a tsunami! Brilliant planning!
The current situation certainly exposes flaws in the design of the Japanese nuclear plants. To be fair, the severy of the disaster was extreme, but this is precisely the kind of worst-case scenario designers should have envisioned when they designed the plant. Even now we might see a partial meltdown in the Fukushima plant, though it appears that they've partially restored function to the cooling system. We should all be thankful that this didn't happen in a place where one of those Soviet RBMK reactors is still in operation - that would almost certainly have resulted in a full meltdown.
As for solar, it should be mandatory on new construction in areas such as Los Angeles, Phoenix, Las Vegas. It won't solve our energy needs but it will lessen them. Use the appropriate alternative technology where it will do the most good. Don't try to ship solar generated electricity across the country, just try to take advantage of it in localities that typically experience a number of sunny days.
Solar panels are one of the most expensive ways to generate electricity (http://en.wikipedia.org/wiki/Cost_of_electricity_by_source), and that is always going to cause a lot of resistance. For a homeowner, it's often a break-even proposition if conditions are favorable (but not necessarily ideal), and if the installation is thought out carefully. Wind power is considerably cheaper than solar and functions in places with little sunlight, so it is an important option to consider. In fact, wind power can be even cheaper than "clean coal" plants.
Still, as you say, different solutions work in different places. Reducing our dependance on non-renewable energy sources must involve every means at our disposal, and they must be implemented to maximum effect wherever the conditions are favorable. Solar enregy is insufficient on its own, as are all the other renewable sources of energy. Only a combination of wind, solar, hydro, geothermal, and other sources can begin to generate enough energy to replace non-renewable sources.
And as skunk mentioned above, we need to find ways to reduce consumption on top of all that.
It's a global problem, though the US is the worst offender. Dealing with the energy crisis must be accomplished by attaking the problem from both ends - renewable sources at one end and lower per capita energy consumption at the other.
The solution does indeed need to be multi-tiered and intelligently applied. I've heard that the Japanese Nuclear plants were built to survive a strong earthquake or a tsunami, but not both. Well what often occurs when you get a strong earthquake offshore? That's right, a tsunami! Brilliant planning!
The current situation certainly exposes flaws in the design of the Japanese nuclear plants. To be fair, the severy of the disaster was extreme, but this is precisely the kind of worst-case scenario designers should have envisioned when they designed the plant. Even now we might see a partial meltdown in the Fukushima plant, though it appears that they've partially restored function to the cooling system. We should all be thankful that this didn't happen in a place where one of those Soviet RBMK reactors is still in operation - that would almost certainly have resulted in a full meltdown.
As for solar, it should be mandatory on new construction in areas such as Los Angeles, Phoenix, Las Vegas. It won't solve our energy needs but it will lessen them. Use the appropriate alternative technology where it will do the most good. Don't try to ship solar generated electricity across the country, just try to take advantage of it in localities that typically experience a number of sunny days.
Solar panels are one of the most expensive ways to generate electricity (http://en.wikipedia.org/wiki/Cost_of_electricity_by_source), and that is always going to cause a lot of resistance. For a homeowner, it's often a break-even proposition if conditions are favorable (but not necessarily ideal), and if the installation is thought out carefully. Wind power is considerably cheaper than solar and functions in places with little sunlight, so it is an important option to consider. In fact, wind power can be even cheaper than "clean coal" plants.
Still, as you say, different solutions work in different places. Reducing our dependance on non-renewable energy sources must involve every means at our disposal, and they must be implemented to maximum effect wherever the conditions are favorable. Solar enregy is insufficient on its own, as are all the other renewable sources of energy. Only a combination of wind, solar, hydro, geothermal, and other sources can begin to generate enough energy to replace non-renewable sources.
And as skunk mentioned above, we need to find ways to reduce consumption on top of all that.
dyler
Oct 7, 06:49 PM
Oh so now we have Android. First it was the Palm Pre that was going to kill the iPhone, that did not happen, then it was this or that touch screen phone that was going to kill the iPhone and that did not happen. When Android first came out with the G1 that was going to kill the iPhone, that did not happen and now we have more Android devices killing the iPhone, not going to happen. This is a load of crap from people who don't know what they are talking about. Android is hard to develop for and is at least two years behind Apple at the moment, how is this going to happen? This is the stupidest prediction I have ever heard from people who don't like Apple for some reason that I cannot understand, let's stop predicting which device is going to be King and just see what happens!!! The main reason I say this will not happen is that Android is only being adopted by technophiles and not everyday people, the iPhone is being adopted by apple technophiles and everyday people, it is the everyday people that decide which device is king and they will not adopt Android unless the OS is completely overhauled in a different direction, people like my 63 year old father have an Iphone now and there is no way he would ever want or use an Android based phone. Tech analysts need to think of everyday people when they predict this crap and not techies who hate Apple for some reason or another!!!
AhmedFaisal
Mar 15, 10:41 PM
Chernobyl was 25 years ago and Russia was not very open to outside help ... no matter how bad this escalades ... somehow this will be contained.
Irrespective of that, given that the reactor design is not the same as Chernobyl an accident of that sort is simply not possible with these reactor types. Chernobyl was a supercriticality event, a runaway nuclear reaction which is a high risk in a high positive void coefficient design like the RBMK which uses graphite as a moderator and water simply for cooling. Loss of cooling in this design leads to a nuclear explosion due to gas bubbles being less off a neutron absorber than liquid and burning graphite along with it. BWR designs such as the ones in Fukushima can't go supercritical if coolant is lost. Thus an explosion and moderator burn such as the one in Chernobyl can't happen. As such, the worst case is a local loss of containment and core melt that can lead to moderate amounts of radioactivity escaping into the immediate local environment. A widespread contamination over hundreds of square miles is simply not possible. As such, the current news reporting is irresponsible spreading of half baked information and knowledge and nothing but fearmongering.
The same goes for some of the BS that is being posted about Germany's reactors or other reactors in western Europe for that matter. Western EU countries do not use RBMK type technology or other high positive void coefficient designs, the only ones that still do is the Czech Republic and a few other former Soviet countries and these reactors are being phased out and being replaced by modern LWR and other designs with western aid.
Irrespective of that, given that the reactor design is not the same as Chernobyl an accident of that sort is simply not possible with these reactor types. Chernobyl was a supercriticality event, a runaway nuclear reaction which is a high risk in a high positive void coefficient design like the RBMK which uses graphite as a moderator and water simply for cooling. Loss of cooling in this design leads to a nuclear explosion due to gas bubbles being less off a neutron absorber than liquid and burning graphite along with it. BWR designs such as the ones in Fukushima can't go supercritical if coolant is lost. Thus an explosion and moderator burn such as the one in Chernobyl can't happen. As such, the worst case is a local loss of containment and core melt that can lead to moderate amounts of radioactivity escaping into the immediate local environment. A widespread contamination over hundreds of square miles is simply not possible. As such, the current news reporting is irresponsible spreading of half baked information and knowledge and nothing but fearmongering.
The same goes for some of the BS that is being posted about Germany's reactors or other reactors in western Europe for that matter. Western EU countries do not use RBMK type technology or other high positive void coefficient designs, the only ones that still do is the Czech Republic and a few other former Soviet countries and these reactors are being phased out and being replaced by modern LWR and other designs with western aid.
Rt&Dzine
Apr 26, 05:50 PM
Or it vanished in a miracle.
For the bread has risen.
That is too ******* funny!
For the bread has risen.
That is too ******* funny!
AppliedVisual
Oct 28, 01:03 PM
Probably true, and quite sad really. SGI was a heck of a company in its day. I'm not sure they could have adapted. Once everybody else abandoned MIPS SGI couldn't afford new processor revisions by themselves, and the false promise that was (and is) Itanium irrevocably doomed them. Itanium basically killed off all the competition when the Unix vendors all hopped on the Itanium bandwagon, and Intel's complete failure to deliver on Itanium's promises looks in hindsight to have been Intel's plan all along. Just think of the performance a MIPS cpu would have were it given the development dollars x86 gets.
SGI tried to build more popularity for MIPS by spinning it off as a totally separate company in the late '90s. But other than embedded applications and various closed architecture implementations, the MIPS CPUs became a dead product line. Too bad, they were always fairly nice CPUs... As for the Itanium deal, the only major UNIX vendor that essentially sunk with the Itanic was SGI. Sun just brushed it off and moved on, as did HP and IBM. SGI's ship was sinking long before thier jump to IA64... They initially started to even go x86 and it was totally obvious that this would work for them. But I think their corporate leadership and investors panicked when suddenly they had two Windows systems on the market that were outperforming their current model Irix workstations for less than half the price. If SGI was smart, they would have dug right in and milked that cow for all it was worth and continued to expand their x86 lines... 64bit x86 was already on the drawing board back then so it wasn't an unknown factor. SGI would have done well to port Irix to x86, too bad they didn't have the foresight to do it.
SGI's technology isn't so much obsolete (who else sells systems with the capacity of an Altix 4700?) as it is unnecessary. 4 CPU Intel machines do just fine for 99.9% of people these days, and the kind of problems SGI machines are good at solving are a tiny niche. That's not just number crunching, a big SGI machine has I/O capacity that smokes a PC cluster.
Altix is nice, but hardly unique in todays marketplace. That and it's still Itanium based, which is a glaring red flag. I'd much rather go for one of Sun's large-scale solutions based on Opteron CPUs. It may only give me 90% of the per-CPU performance with 70% of the bandwidth across the entire cluster, but it's also half the price and I know that the CPU architecture will still be supported several years from now. Itanium is all but dead and Intel doesn't even seem interested in supporting it anymore. Most major workstation and server vendors have dropped it already and Intel has missed ship dates for most of the IA64 products on their roadmap. SGI claims they came out of bankruptcy a very focused and agile company... Yet they're still producing products based on a CPU architecture most the rest of the industry has already written off. So yeah, niche market for sure. SGI can't even muster the resources to continue development of Irix and it's being discontinued this year. So now all they have is some overgrown IA64 Linux boxes. What's going to happen if their current sales figures stay about the same and their own technologies dry up? They're just going to become another business-oriented Linux server vendor placing off-the-shelf components in some of the prettiest boxes around for a super-premium price. ...That's practically all they are now and the only thing that really differentiates their products (other than the cool system bezels and rack enclosures) is their NUMALink design.
I used to be very fond of SGI and their products, but that was years ago... The past 6 years have been a continuous downhill spiral and the company I once loved has been dead and gone for a long time now.
SGI tried to build more popularity for MIPS by spinning it off as a totally separate company in the late '90s. But other than embedded applications and various closed architecture implementations, the MIPS CPUs became a dead product line. Too bad, they were always fairly nice CPUs... As for the Itanium deal, the only major UNIX vendor that essentially sunk with the Itanic was SGI. Sun just brushed it off and moved on, as did HP and IBM. SGI's ship was sinking long before thier jump to IA64... They initially started to even go x86 and it was totally obvious that this would work for them. But I think their corporate leadership and investors panicked when suddenly they had two Windows systems on the market that were outperforming their current model Irix workstations for less than half the price. If SGI was smart, they would have dug right in and milked that cow for all it was worth and continued to expand their x86 lines... 64bit x86 was already on the drawing board back then so it wasn't an unknown factor. SGI would have done well to port Irix to x86, too bad they didn't have the foresight to do it.
SGI's technology isn't so much obsolete (who else sells systems with the capacity of an Altix 4700?) as it is unnecessary. 4 CPU Intel machines do just fine for 99.9% of people these days, and the kind of problems SGI machines are good at solving are a tiny niche. That's not just number crunching, a big SGI machine has I/O capacity that smokes a PC cluster.
Altix is nice, but hardly unique in todays marketplace. That and it's still Itanium based, which is a glaring red flag. I'd much rather go for one of Sun's large-scale solutions based on Opteron CPUs. It may only give me 90% of the per-CPU performance with 70% of the bandwidth across the entire cluster, but it's also half the price and I know that the CPU architecture will still be supported several years from now. Itanium is all but dead and Intel doesn't even seem interested in supporting it anymore. Most major workstation and server vendors have dropped it already and Intel has missed ship dates for most of the IA64 products on their roadmap. SGI claims they came out of bankruptcy a very focused and agile company... Yet they're still producing products based on a CPU architecture most the rest of the industry has already written off. So yeah, niche market for sure. SGI can't even muster the resources to continue development of Irix and it's being discontinued this year. So now all they have is some overgrown IA64 Linux boxes. What's going to happen if their current sales figures stay about the same and their own technologies dry up? They're just going to become another business-oriented Linux server vendor placing off-the-shelf components in some of the prettiest boxes around for a super-premium price. ...That's practically all they are now and the only thing that really differentiates their products (other than the cool system bezels and rack enclosures) is their NUMALink design.
I used to be very fond of SGI and their products, but that was years ago... The past 6 years have been a continuous downhill spiral and the company I once loved has been dead and gone for a long time now.
Mr-Stabby
Apr 12, 10:28 PM
Does anyone know if the new FC will take AVCHD files natively as Premiere CS5 does?
From what i gathered, if it doesn't, at the very least it transcodes them in the background as you've imported them, so you can work on them straight away.
But it might actually work natively. It was strongly suggested a lot more files could be imported natively, DSLR was mentioned.
From what i gathered, if it doesn't, at the very least it transcodes them in the background as you've imported them, so you can work on them straight away.
But it might actually work natively. It was strongly suggested a lot more files could be imported natively, DSLR was mentioned.
superleccy
Sep 20, 06:24 AM
I was hoping that's the purpose of the USB port. I know many are thinking it's for the iPod, but I'm hoping you can plug a tuner in :)
edit: in addition to the plug-in tuner, I hope it streams backwards to the computer harddrive.
I was thinking the EyeTV would plug into the USB port on the Mac (as it does today), but the iTV will let you watch it and control it from your living room.
But actually, I am starting to see your (and dobbin's) point. In some ways it might be more convenient if the EyeTV actually plugged into the iTV, and gave you the option of streaming back to you Mac... at least then your EyeTV Tuner would be near where your Sat/Cable/Ariel socket is. But now it's starting to sound expensive and more like a Mac Mini...
SL
edit: in addition to the plug-in tuner, I hope it streams backwards to the computer harddrive.
I was thinking the EyeTV would plug into the USB port on the Mac (as it does today), but the iTV will let you watch it and control it from your living room.
But actually, I am starting to see your (and dobbin's) point. In some ways it might be more convenient if the EyeTV actually plugged into the iTV, and gave you the option of streaming back to you Mac... at least then your EyeTV Tuner would be near where your Sat/Cable/Ariel socket is. But now it's starting to sound expensive and more like a Mac Mini...
SL
AppliedVisual
Oct 21, 12:42 PM
I'm Speechless. All I can think of is "Wow!"
Makes 20" 1600 x 1200 look puny and the 24" 1920 x 1200 modest.
Yep. Now that I've gone with the 30", I feel so cramped on anything smaller. The dual 30" config is awesome... More than enough space to leave all kinds of stuff accessible - it's insanely wonderfully cool.
...Which brings up my little learning experience over the past couple days. I fired up my 30" as the second display on may G5 quad and all was well. But I was starting to have second thoughts about crowding my desk at home. I packed it back up and took it to the office, plugged it in. Came right up, but I couldn't set the resolution on it to anything higher than 1280x800. Hmmm.... Both had the same video card, (or so I thought), both were the same system, the one at the office was manufactured 12/05, the one at home was 10/05. So I try some different software re-installs and whatnot can't figure it out. so I jump online and research until I'm blue... The 7800GT only has a single dual-link DVI port. Weird, I thought it had two? So I packed the monitor back up, took it home to see what was up... Before plugging it into my quad at home, I started to move the system to open it up and noticed the extra fan openign next to the DVI connectors and the round mini-din style connector. WTF! So I popped the lid real quick to make sure I wasn't hallucinating. This system has the FX4500 and I never even noticed until now. I guess I never checked. :o I had to dig out my invoice, it was a refurbished system I bought from a local dealer -- system was a lease return that made it back to them after only 3 months. It supposedly had the 7800GT in it, but nope - FX4500.
Lucky me. :D My resale value on this system just went way up. ;)
How do I look for dead pixels AppliedVisual? Yes I want two. :)
Two kinds of bad pixels usually show on LCD monitors. Dead pixels are pixels that are black and won't do anything, somewhat rare, really. Stuck pixels are pixels where one of the R, G or B elements is "stuck" at a certain color value and won't change. Typically stuck pixels are stuck full-on and will stand out against dark backgrounds. The best way to check for them is to run a full-screen game or program that can show a black background, other color backgrounds can be helful at times too. Stuck pixels will be visible pixels in these situations. Usually, you'll see them when they show up as they do tend to stand out against contrasting backgrounds. Other types of anomalies on these displays are white pixels or sparkles, which can either be static like a dead/stuck pixel or they can move or come and go. These are usually caused by a poor video signal or too much power over the video interface. Sometimes can even be a faulty GPU. Multi-component pixels - where more than just one R, G or B component is stuck on at the same pixel location are often a faulty GPU. But sparkels and multi-component pixels can still be a defective display... I ordered a Dell notebook for an employee a couple years ago and it arrived with hundreds of stuck/multicomp. pixels all around the screen edges. Dell swapped it out, but I know it was caused by the system sitting on a loading dock or in a truck overnight when it got to -25F here. The LCD screen literally froze all around the edges causing irrepairable damage!
The 30" makes such a huge difference in managing windows of different applications simultaneously. I can see why you wanted 2 AV. Tell me, is there a significant improvement inthe design of your 3007 vs the 3005
AFAIK, there never was a 3005 model, only the 3007. Dell didn't announce their 30" display until last December. I ordered mine on Christmas Eve last year and received it the first week of January. It's a 3007 model as well, Rev.A00. The new one is Rev.A02. Both are identical except I find the old one to have a slight tint to the whites. I had to tweak the color profile for the old one a bit to match the new one, but now it's fine. I don't know if it's a difference in revisions or just normal variation between models or what. The difference is slight, and is only noticeable when the two are side by side, which they are. :D On the bright side, with that Dell forum coupon, my new one was nearly $1K cheaper than the first one.
Makes 20" 1600 x 1200 look puny and the 24" 1920 x 1200 modest.
Yep. Now that I've gone with the 30", I feel so cramped on anything smaller. The dual 30" config is awesome... More than enough space to leave all kinds of stuff accessible - it's insanely wonderfully cool.
...Which brings up my little learning experience over the past couple days. I fired up my 30" as the second display on may G5 quad and all was well. But I was starting to have second thoughts about crowding my desk at home. I packed it back up and took it to the office, plugged it in. Came right up, but I couldn't set the resolution on it to anything higher than 1280x800. Hmmm.... Both had the same video card, (or so I thought), both were the same system, the one at the office was manufactured 12/05, the one at home was 10/05. So I try some different software re-installs and whatnot can't figure it out. so I jump online and research until I'm blue... The 7800GT only has a single dual-link DVI port. Weird, I thought it had two? So I packed the monitor back up, took it home to see what was up... Before plugging it into my quad at home, I started to move the system to open it up and noticed the extra fan openign next to the DVI connectors and the round mini-din style connector. WTF! So I popped the lid real quick to make sure I wasn't hallucinating. This system has the FX4500 and I never even noticed until now. I guess I never checked. :o I had to dig out my invoice, it was a refurbished system I bought from a local dealer -- system was a lease return that made it back to them after only 3 months. It supposedly had the 7800GT in it, but nope - FX4500.
Lucky me. :D My resale value on this system just went way up. ;)
How do I look for dead pixels AppliedVisual? Yes I want two. :)
Two kinds of bad pixels usually show on LCD monitors. Dead pixels are pixels that are black and won't do anything, somewhat rare, really. Stuck pixels are pixels where one of the R, G or B elements is "stuck" at a certain color value and won't change. Typically stuck pixels are stuck full-on and will stand out against dark backgrounds. The best way to check for them is to run a full-screen game or program that can show a black background, other color backgrounds can be helful at times too. Stuck pixels will be visible pixels in these situations. Usually, you'll see them when they show up as they do tend to stand out against contrasting backgrounds. Other types of anomalies on these displays are white pixels or sparkles, which can either be static like a dead/stuck pixel or they can move or come and go. These are usually caused by a poor video signal or too much power over the video interface. Sometimes can even be a faulty GPU. Multi-component pixels - where more than just one R, G or B component is stuck on at the same pixel location are often a faulty GPU. But sparkels and multi-component pixels can still be a defective display... I ordered a Dell notebook for an employee a couple years ago and it arrived with hundreds of stuck/multicomp. pixels all around the screen edges. Dell swapped it out, but I know it was caused by the system sitting on a loading dock or in a truck overnight when it got to -25F here. The LCD screen literally froze all around the edges causing irrepairable damage!
The 30" makes such a huge difference in managing windows of different applications simultaneously. I can see why you wanted 2 AV. Tell me, is there a significant improvement inthe design of your 3007 vs the 3005
AFAIK, there never was a 3005 model, only the 3007. Dell didn't announce their 30" display until last December. I ordered mine on Christmas Eve last year and received it the first week of January. It's a 3007 model as well, Rev.A00. The new one is Rev.A02. Both are identical except I find the old one to have a slight tint to the whites. I had to tweak the color profile for the old one a bit to match the new one, but now it's fine. I don't know if it's a difference in revisions or just normal variation between models or what. The difference is slight, and is only noticeable when the two are side by side, which they are. :D On the bright side, with that Dell forum coupon, my new one was nearly $1K cheaper than the first one.
slu
Sep 12, 03:26 PM
I agree with most of the comments thus far.
I am excited at the prospect of an Apple "Media Center", but this just seems like wireless front row for your TV. Which is nice, but I want a DVR and I want to be able to slide a DVD in there. I don't want to have to go to my Mac in another room to watch a DVD. But I suppose Apple does not want you to buy DVDs anymore. And if you can't order movies from the couch, then it will also suffer.
And if it works as well as my airport express does for audio (which is just OK, a lot of skips, but then I am still on 802.11b because of my TiVo), then I will pass altogether.
Good price point though. And I wonder if it'll be Mac and PC?
I am excited at the prospect of an Apple "Media Center", but this just seems like wireless front row for your TV. Which is nice, but I want a DVR and I want to be able to slide a DVD in there. I don't want to have to go to my Mac in another room to watch a DVD. But I suppose Apple does not want you to buy DVDs anymore. And if you can't order movies from the couch, then it will also suffer.
And if it works as well as my airport express does for audio (which is just OK, a lot of skips, but then I am still on 802.11b because of my TiVo), then I will pass altogether.
Good price point though. And I wonder if it'll be Mac and PC?
Toneaphone
Feb 25, 03:39 PM
Even though Android has more potential users, they will never be as successful as the iPhone until they improve their app capabilities. Once they do this, developers will make better apps and games, and customers will buy more. It ultimately boils down to the degree of consumption per user rather than the quantity of potential customers. One person can easily install 150+ apps for the iPhone in no time. Over 3 billion apps have been downloaded to date...It will be an extremely long time until Android meets that milestone.
danielwsmithee
Sep 12, 04:07 PM
But at what quality??? Q1 2007 is as late as end of March. HD-DVD came out in April and BluRay in -- what -- May? So almost a year later Apple introduces a device that will play *near* (i.e. lower than) DVD-quality when the market is finally warming up to HD quality disks. Dude did you miss the coverage. This thing plays HD. He played Incredibles in HD. Just because the content they are offering now is 480p does not mean that it will be 6 months from now when this is released. Also the HDMI and component connectors would be pointless if it was not HD.
clebin
Apr 13, 05:03 AM
A reminder of Jobs' stunning hypocrisy from a year ago:
"For example, although Mac OS X has been shipping for almost 10 years now, Adobe just adopted it fully (Cocoa) two weeks ago when they shipped CS5. Adobe was the last major third party developer to fully adopt Mac OS X."
Congrats on another Cocoa port, Apple.
"For example, although Mac OS X has been shipping for almost 10 years now, Adobe just adopted it fully (Cocoa) two weeks ago when they shipped CS5. Adobe was the last major third party developer to fully adopt Mac OS X."
Congrats on another Cocoa port, Apple.
dpaanlka
Oct 20, 01:43 PM
So the high end will no longer be at 3ghz?
How hard can an extra 333mhz be to attain? Especially with these cool-running Intel chips.
How hard can an extra 333mhz be to attain? Especially with these cool-running Intel chips.
KnightWRX
May 2, 09:05 AM
WOW! Malware that requires the user to do a Google search, then download, and install. For all of this, it asks for your credit card number.
How can we ever defend our computers against such a diabolical threat?!
Hum, download and install are automatic. Good thing I don't use Safari.
As I understand it, Safari will open the zip file since it's a "safe" download. But that doesn't mean it'll execute the code within that zip file, so how is this malware executing without user permission?
I haven't seen this malware first hand, but a zip file can be made with absolute paths, making "unzipping" the file put everything where it needs to be to start up automatically on next log in/reboot.
Who's the brainiac who made zip files "safe" ?
so much for the no malware on macs myth :D
funny how the apple fanboys are getting all defensive :rolleyes:
No viruses on the Mac. There's been malware for OS X for quite a while now.
How can we ever defend our computers against such a diabolical threat?!
Hum, download and install are automatic. Good thing I don't use Safari.
As I understand it, Safari will open the zip file since it's a "safe" download. But that doesn't mean it'll execute the code within that zip file, so how is this malware executing without user permission?
I haven't seen this malware first hand, but a zip file can be made with absolute paths, making "unzipping" the file put everything where it needs to be to start up automatically on next log in/reboot.
Who's the brainiac who made zip files "safe" ?
so much for the no malware on macs myth :D
funny how the apple fanboys are getting all defensive :rolleyes:
No viruses on the Mac. There's been malware for OS X for quite a while now.
davelanger
Apr 28, 11:56 AM
This is because they have continued to put time and money in to iOS and not Mac. They have been lazy and done practically done nothing with desktops and their notebooks. They need to start putting emphasis on to Macs now.
Isnt that what they are doing with Lion?
I am quite familiar, perhaps you should read it again.
The iPod was introduced in hit popularity in 2003 / when it was later replaced (in the eyes of masses of people buying them) by the iPhone, and later iPod Touch as the next "new thing".
Do you still see masses of people with White or Black iPods? Or do you see them carrying iPhones or iPod Touches now?
What has been on the news recently the most, sought after by most Apple fans? I don't think it is the iPod.
You dont know what a fad is. Thats like calling dial up internet a fad because now pretty much everyone is using cable or fios internet. An ipod touch is still an ipod, its just better version of an ipod black/white.
A fad is something that comes alot that is huge for a short time then fades out. Just because tech advances doesnt mean the first gen was a fad.
Isnt that what they are doing with Lion?
I am quite familiar, perhaps you should read it again.
The iPod was introduced in hit popularity in 2003 / when it was later replaced (in the eyes of masses of people buying them) by the iPhone, and later iPod Touch as the next "new thing".
Do you still see masses of people with White or Black iPods? Or do you see them carrying iPhones or iPod Touches now?
What has been on the news recently the most, sought after by most Apple fans? I don't think it is the iPod.
You dont know what a fad is. Thats like calling dial up internet a fad because now pretty much everyone is using cable or fios internet. An ipod touch is still an ipod, its just better version of an ipod black/white.
A fad is something that comes alot that is huge for a short time then fades out. Just because tech advances doesnt mean the first gen was a fad.
econgeek
Apr 12, 11:01 PM
Yes, that was exactly my point. The people who know how to use the software are (sometimes) assistant editors, although I find the vast majority know how to do a few simple things, but do them well.. The original poster was implying you needed to be a hollywood film editor to judge technical capabilities, and I was saying they were the worst choice for just that reason.
The people who know the most about editing systems are the Sr. editors who work on heavy, effects based sequences that work in broadcast production environments (I'm not talking about me here). *They* are the ones who push systems to the limits and *they* are the ones who go to NAB. (They're still only 10% of that room)
I think that most of them will find that Apple has, at present abandoned them. That's not to say the industry won't shift, and there won't be enough 3rd party solutions out there, but they are throwing Avid a HUGE bone here.
FCP was making big inroads into broadcast, and they're throwing it away-- for today certainly.
Filmwise, could go either way, depending on the production. If it's got great RED/4k performance, "film" support isn't so important..
But for the indie crowd, they're really screwing them over, if they are abandoning Color. *THAT* is what shocked me. I'm also surprised that effects weren't more advanced. I couldn't see anything on a titling tool, but that's pretty imporant for Broadcast as well.. and *no* existing solution is good for that... They really had (have?) a chance to make that right, and it seems they don't care.
So, when I say "iMovie Pro" that isn't necessarily pejorative. This product is WAY, WAY, WAY more iMovie than FCP. That doesn't mean you can't cut "a real movie" on it. But for Broadcast TV, it's a real step down in a lot of ways-- at the very least not a step up.. The interface is very iMovie. They should have called it iMovie PRO, especially if they're getting rid of the rest of the FCS apps..
Now if it turns out this is just the tip of the iceberg-- then we really could be in for a treat.
You're assuming that if you didn't see a demo of it, it doesn't exist. iMovie has titling built in. They didn't demo titling this evening. Therefore, you're presuming this app has less titling than iMovie!
That seems pretty silly.
The people who know the most about editing systems are the Sr. editors who work on heavy, effects based sequences that work in broadcast production environments (I'm not talking about me here). *They* are the ones who push systems to the limits and *they* are the ones who go to NAB. (They're still only 10% of that room)
I think that most of them will find that Apple has, at present abandoned them. That's not to say the industry won't shift, and there won't be enough 3rd party solutions out there, but they are throwing Avid a HUGE bone here.
FCP was making big inroads into broadcast, and they're throwing it away-- for today certainly.
Filmwise, could go either way, depending on the production. If it's got great RED/4k performance, "film" support isn't so important..
But for the indie crowd, they're really screwing them over, if they are abandoning Color. *THAT* is what shocked me. I'm also surprised that effects weren't more advanced. I couldn't see anything on a titling tool, but that's pretty imporant for Broadcast as well.. and *no* existing solution is good for that... They really had (have?) a chance to make that right, and it seems they don't care.
So, when I say "iMovie Pro" that isn't necessarily pejorative. This product is WAY, WAY, WAY more iMovie than FCP. That doesn't mean you can't cut "a real movie" on it. But for Broadcast TV, it's a real step down in a lot of ways-- at the very least not a step up.. The interface is very iMovie. They should have called it iMovie PRO, especially if they're getting rid of the rest of the FCS apps..
Now if it turns out this is just the tip of the iceberg-- then we really could be in for a treat.
You're assuming that if you didn't see a demo of it, it doesn't exist. iMovie has titling built in. They didn't demo titling this evening. Therefore, you're presuming this app has less titling than iMovie!
That seems pretty silly.
No comments:
Post a Comment